D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
local
/
lib64
/
python3.6
/
site-packages
/
matplotlib
/
Filename :
tight_layout.py
back
Copy
""" Routines to adjust subplot params so that subplots are nicely fit in the figure. In doing so, only axis labels, tick labels, axes titles and offsetboxes that are anchored to axes are currently considered. Internally, this module assumes that the margins (left_margin, etc.) which are differences between ax.get_tightbbox and ax.bbox are independent of axes position. This may fail if Axes.adjustable is datalim. Also, This will fail for some cases (for example, left or right margin is affected by xlabel). """ import numpy as np from matplotlib import cbook, rcParams from matplotlib.font_manager import FontProperties from matplotlib.transforms import TransformedBbox, Bbox def auto_adjust_subplotpars( fig, renderer, nrows_ncols, num1num2_list, subplot_list, ax_bbox_list=None, pad=1.08, h_pad=None, w_pad=None, rect=None): """ Return a dict of subplot parameters to adjust spacing between subplots or ``None`` if resulting axes would have zero height or width. Note that this function ignores geometry information of subplot itself, but uses what is given by the *nrows_ncols* and *num1num2_list* parameters. Also, the results could be incorrect if some subplots have ``adjustable=datalim``. Parameters ---------- nrows_ncols : Tuple[int, int] Number of rows and number of columns of the grid. num1num2_list : List[int] List of numbers specifying the area occupied by the subplot subplot_list : list of subplots List of subplots that will be used to calculate optimal subplot_params. pad : float Padding between the figure edge and the edges of subplots, as a fraction of the font size. h_pad, w_pad : float Padding (height/width) between edges of adjacent subplots, as a fraction of the font size. Defaults to *pad*. rect : Tuple[float, float, float, float] [left, bottom, right, top] in normalized (0, 1) figure coordinates. """ rows, cols = nrows_ncols font_size_inches = ( FontProperties(size=rcParams["font.size"]).get_size_in_points() / 72) pad_inches = pad * font_size_inches vpad_inches = h_pad * font_size_inches if h_pad is not None else pad_inches hpad_inches = w_pad * font_size_inches if w_pad is not None else pad_inches if len(num1num2_list) != len(subplot_list) or len(subplot_list) == 0: raise ValueError if rect is None: margin_left = margin_bottom = margin_right = margin_top = None else: margin_left, margin_bottom, _right, _top = rect margin_right = 1 - _right if _right else None margin_top = 1 - _top if _top else None vspaces = np.zeros((rows + 1, cols)) hspaces = np.zeros((rows, cols + 1)) if ax_bbox_list is None: ax_bbox_list = [ Bbox.union([ax.get_position(original=True) for ax in subplots]) for subplots in subplot_list] for subplots, ax_bbox, (num1, num2) in zip(subplot_list, ax_bbox_list, num1num2_list): if all(not ax.get_visible() for ax in subplots): continue bb = [] for ax in subplots: if ax.get_visible(): try: bb += [ax.get_tightbbox(renderer, for_layout_only=True)] except TypeError: bb += [ax.get_tightbbox(renderer)] tight_bbox_raw = Bbox.union(bb) tight_bbox = TransformedBbox(tight_bbox_raw, fig.transFigure.inverted()) row1, col1 = divmod(num1, cols) if num2 is None: num2 = num1 row2, col2 = divmod(num2, cols) for row_i in range(row1, row2 + 1): hspaces[row_i, col1] += ax_bbox.xmin - tight_bbox.xmin # left hspaces[row_i, col2 + 1] += tight_bbox.xmax - ax_bbox.xmax # right for col_i in range(col1, col2 + 1): vspaces[row1, col_i] += tight_bbox.ymax - ax_bbox.ymax # top vspaces[row2 + 1, col_i] += ax_bbox.ymin - tight_bbox.ymin # bot. fig_width_inch, fig_height_inch = fig.get_size_inches() # margins can be negative for axes with aspect applied, so use max(, 0) to # make them nonnegative. if not margin_left: margin_left = (max(hspaces[:, 0].max(), 0) + pad_inches / fig_width_inch) if not margin_right: margin_right = (max(hspaces[:, -1].max(), 0) + pad_inches / fig_width_inch) if not margin_top: margin_top = (max(vspaces[0, :].max(), 0) + pad_inches / fig_height_inch) suptitle = fig._suptitle if suptitle and suptitle.get_in_layout(): rel_suptitle_height = fig.transFigure.inverted().transform_bbox( suptitle.get_window_extent(renderer)).height margin_top += rel_suptitle_height + pad_inches / fig_height_inch if not margin_bottom: margin_bottom = (max(vspaces[-1, :].max(), 0) + pad_inches / fig_height_inch) if margin_left + margin_right >= 1: cbook._warn_external('Tight layout not applied. The left and right ' 'margins cannot be made large enough to ' 'accommodate all axes decorations. ') return None if margin_bottom + margin_top >= 1: cbook._warn_external('Tight layout not applied. The bottom and top ' 'margins cannot be made large enough to ' 'accommodate all axes decorations. ') return None kwargs = dict(left=margin_left, right=1 - margin_right, bottom=margin_bottom, top=1 - margin_top) if cols > 1: hspace = hspaces[:, 1:-1].max() + hpad_inches / fig_width_inch # axes widths: h_axes = (1 - margin_right - margin_left - hspace * (cols - 1)) / cols if h_axes < 0: cbook._warn_external('Tight layout not applied. tight_layout ' 'cannot make axes width small enough to ' 'accommodate all axes decorations') return None else: kwargs["wspace"] = hspace / h_axes if rows > 1: vspace = vspaces[1:-1, :].max() + vpad_inches / fig_height_inch v_axes = (1 - margin_top - margin_bottom - vspace * (rows - 1)) / rows if v_axes < 0: cbook._warn_external('Tight layout not applied. tight_layout ' 'cannot make axes height small enough to ' 'accommodate all axes decorations') return None else: kwargs["hspace"] = vspace / v_axes return kwargs def get_renderer(fig): if fig._cachedRenderer: return fig._cachedRenderer else: canvas = fig.canvas if canvas and hasattr(canvas, "get_renderer"): return canvas.get_renderer() else: from . import backend_bases return backend_bases._get_renderer(fig) def get_subplotspec_list(axes_list, grid_spec=None): """ Return a list of subplotspec from the given list of axes. For an instance of axes that does not support subplotspec, None is inserted in the list. If grid_spec is given, None is inserted for those not from the given grid_spec. """ subplotspec_list = [] for ax in axes_list: axes_or_locator = ax.get_axes_locator() if axes_or_locator is None: axes_or_locator = ax if hasattr(axes_or_locator, "get_subplotspec"): subplotspec = axes_or_locator.get_subplotspec() subplotspec = subplotspec.get_topmost_subplotspec() gs = subplotspec.get_gridspec() if grid_spec is not None: if gs != grid_spec: subplotspec = None elif gs.locally_modified_subplot_params(): subplotspec = None else: subplotspec = None subplotspec_list.append(subplotspec) return subplotspec_list def get_tight_layout_figure(fig, axes_list, subplotspec_list, renderer, pad=1.08, h_pad=None, w_pad=None, rect=None): """ Return subplot parameters for tight-layouted-figure with specified padding. Parameters ---------- fig : Figure axes_list : list of Axes subplotspec_list : list of `.SubplotSpec` The subplotspecs of each axes. renderer : renderer pad : float Padding between the figure edge and the edges of subplots, as a fraction of the font size. h_pad, w_pad : float Padding (height/width) between edges of adjacent subplots. Defaults to *pad*. rect : Tuple[float, float, float, float], optional (left, bottom, right, top) rectangle in normalized figure coordinates that the whole subplots area (including labels) will fit into. Defaults to using the entire figure. Returns ------- subplotspec or None subplotspec kwargs to be passed to `.Figure.subplots_adjust` or None if tight_layout could not be accomplished. """ subplot_list = [] nrows_list = [] ncols_list = [] ax_bbox_list = [] # Multiple axes can share same subplot_interface (e.g., axes_grid1); thus # we need to join them together. subplot_dict = {} subplotspec_list2 = [] for ax, subplotspec in zip(axes_list, subplotspec_list): if subplotspec is None: continue subplots = subplot_dict.setdefault(subplotspec, []) if not subplots: myrows, mycols, _, _ = subplotspec.get_geometry() nrows_list.append(myrows) ncols_list.append(mycols) subplotspec_list2.append(subplotspec) subplot_list.append(subplots) ax_bbox_list.append(subplotspec.get_position(fig)) subplots.append(ax) if len(nrows_list) == 0 or len(ncols_list) == 0: return {} max_nrows = max(nrows_list) max_ncols = max(ncols_list) num1num2_list = [] for subplotspec in subplotspec_list2: rows, cols, num1, num2 = subplotspec.get_geometry() div_row, mod_row = divmod(max_nrows, rows) div_col, mod_col = divmod(max_ncols, cols) if mod_row != 0: cbook._warn_external('tight_layout not applied: number of rows ' 'in subplot specifications must be ' 'multiples of one another.') return {} if mod_col != 0: cbook._warn_external('tight_layout not applied: number of ' 'columns in subplot specifications must be ' 'multiples of one another.') return {} rowNum1, colNum1 = divmod(num1, cols) if num2 is None: rowNum2, colNum2 = rowNum1, colNum1 else: rowNum2, colNum2 = divmod(num2, cols) num1num2_list.append((rowNum1 * div_row * max_ncols + colNum1 * div_col, ((rowNum2 + 1) * div_row - 1) * max_ncols + (colNum2 + 1) * div_col - 1)) kwargs = auto_adjust_subplotpars(fig, renderer, nrows_ncols=(max_nrows, max_ncols), num1num2_list=num1num2_list, subplot_list=subplot_list, ax_bbox_list=ax_bbox_list, pad=pad, h_pad=h_pad, w_pad=w_pad) # kwargs can be none if tight_layout fails... if rect is not None and kwargs is not None: # if rect is given, the whole subplots area (including # labels) will fit into the rect instead of the # figure. Note that the rect argument of # *auto_adjust_subplotpars* specify the area that will be # covered by the total area of axes.bbox. Thus we call # auto_adjust_subplotpars twice, where the second run # with adjusted rect parameters. left, bottom, right, top = rect if left is not None: left += kwargs["left"] if bottom is not None: bottom += kwargs["bottom"] if right is not None: right -= (1 - kwargs["right"]) if top is not None: top -= (1 - kwargs["top"]) kwargs = auto_adjust_subplotpars(fig, renderer, nrows_ncols=(max_nrows, max_ncols), num1num2_list=num1num2_list, subplot_list=subplot_list, ax_bbox_list=ax_bbox_list, pad=pad, h_pad=h_pad, w_pad=w_pad, rect=(left, bottom, right, top)) return kwargs